The paint that looks new even after repeated scrubbing.
ULTRA-SCRUB® is a professional scrubbable and washable latex flat paint specifically designed for use on interior walls, ceilings, and other properly prepared and primed surfaces in new residential dwellings. ULTRA-SCRUB® is an upgrade from standard new residential flat finishes, providing a tough, durable finish that is extremely washable. It has excellent touch-up qualities, very good hide, and is self-priming on new drywall.
- Quality scrubbable and washable latex flat paint
- Specifically designed for use on interior walls, ceilings and other properly prepared and primed surfaces in new residential dwellings
- An upgrade from standard new residential flat finishes, providing a tough, durable finish that is extremely washable
- Has excellent touch-up qualities, very good hide and is self-priming on new drywall
| Applications |  Flat |
|---|---|
| Bedroom | |
| Ceiling | |
| Dining Room | |
| Family Room | |
| Hallways | |
| Living Room | |
| Office |
These are commonly used gloss levels for surfaces listed above. Gloss may be affected by texture, porosity of the surface and atmospheric conditions. Please contact a Dunn-Edwards representative or your local store for specific product availability.
See the ULTRA-SCRUB® difference for yourself
Scrub Resistance Test
ULTRA-SCRUB® outperforms other brands in durability after repeated scrub cycles. That means the painted surface will maintain its original appearance longer.
Test Method:
Paints are applied to black charts. After drying for seven days, the charts are placed in an abrasion testing machine and stopped at the indicated cycle. Complete deterioration occurs when a full line of black background is exposed.
Touch-Up Test
ULTRA-SCRUB® allows for better touch-up than competitive brands, so minor repairs are less noticeable.
Test Method:
A 2´x2´ drywall boared is primed with a white acrylic primer. After allowing the primer to dry for 24 hours, a coat of paint (tinted to DE6143 Almond Latte) is spray applied to the entire board. One half the panel is then back rolled and allowed to dry. After 24 hours, a touch-up is performed with a brush and roller on the back-rolled and sprayed sides of the board. The results are evaluated.
